Solvometallurgical process for the recovery of rare-earth elements from Nd–Fe–B magnets

Nd-Fe-B permanent magnets have been recycled in a free-water process that enables to intensify the leaching (only 10 min with a ratio lixiviant-to-solid of 10 g/g) and to recover dysprosium and neodymium from the iron(II,III) containing leachate by solvent extraction at T>100 °C. The reuse of the lixiviant and a conceptual flowsheet have been proposed too.

Abstract

The protic ionic liquid pyridine hydrochloride is known to be a non-aqueous solvent for metal oxides, including rare-earth oxides. However, its application in extractive metallurgy and especially in solvent extraction has been so far limited by its miscibility with the aqueous phase.

In this paper, molten pyridine hydrochloride (165 °C) was used to dissolve production scrap of Nd–Fe–B permanent magnets to recover the valuable metals neodymium and dysprosium. The Nd–Fe–B scrap powder completely dissolved in just 10 min with a lixiviant–to–solid ratio of 10 g g−1.

Afterwards, non-aqueous solvent extraction was performed at high temperature (165 °C) by using molecular extractants (PC-88A) or ionic liquids (Cyphos IL 101). The high temperature lowers the viscosity of the solvents, so that they can be used in undiluted form.

Moreover, the high temperature affects the equilibrium constants and, hence, the distribution of the metals between the two phases. In the first stage, 30 vol% PC-88A in p-cymene was used to extract dysprosium(III), whereas in the second stage 100 vol% PC-88A was used to extract most of the neodymium(III). 

Finally, a mixture of Cyphos IL 101–p-cymene 70:30 (wt.:wt.) was shown to efficiently extract iron(II,III) from the concentrate leachate.

A conceptual flowsheet was designed, which included the recycling of the pyridine hydrochloride to lower the costs and the environmental impact of the process.

Full reference paper

M. Orefice, K. Binnemans, Solvometallurgical process for the recovery of rare-earth elements from Nd–Fe–B magnets, Sep. Purif. Technol. 258 (2020) 117800. https://doi.org/10.1016/j.seppur.2020.117800.

Acknowledgments

The research leading to these results received funding from the European Commission’s Horizon 2020 Programme ([H2020/2014-2019]) under Grant Agreement no. 674973 (MSCA-ETN DEMETER) and under Grant Agreement 694078—Solvometallurgy for critical metals (ERC Advanced Grant SOLCRIMET). This publication reflects only the authors’ view, exempting the Commission from any liability.